EQUIPMENT / TOOLS & ACCESSORIES

ROV tools & accessories.

The tool decides what an ROV can do. Each one must match the vehicle, its power supply and the working depth.

THE RANGE

Five groups. One question first.

Which vehicle carries it, what powers it and how deep it must work. Figures are from the manufacturer brochure.

01 / 5 MODELS

Manipulator arms

Grippers and multi-function arms for handling, sampling and light intervention.

F-ARM-S · single-function · arm span 300 mm
F-ARM-D · two-function · arm span 266 mm
F-ARM-3A · three-function · arm span 570 mm
F-ARM-4A · four-function · arm span 700 mm
F-ARM-5A · five-function · arm span 610 mm

02 / 6 MODELS

Intervention tools

Breaking, grinding, chiselling, drilling, cleaning and cutting tools. Most need a hydraulic or high-pressure water supply.

UWBreaking · breaker · brochure working depth ≥40 m
UWGrinding · grinder · rated speed 2,500 r/min
UWChisel · chisel · working pressure 100–140 bar
UWDrill · drill · working pressure 70–140 bar
UWWashing · cleaning unit · impact pressure ≥30 MPa
UWCutting · cutter · working pressure 105–140 bar

03 / 4 MODELS

Measurement & sampling

Sensors and samplers for locating, measuring and recording.

UWRadar · underwater radar · 3.8 kg in air
F-LM50 · short-range laser measuring device · brochure range 50 cm
IJTracer · ink-jet tracer · 3 kg without fluorescent ink
WB6X100 · water sampler · 3.43 kg in air

04 / 6 MODELS

Thrusters

Replacement and upgrade thrusters, including magnetic-coupling models.

F-PROP-6A / 6B · rated thrust 6 kg
F-PROP-10 · rated thrust 10 kg
F-TM-20B · magnetic coupling · 20 kg
F-TM-40A · magnetic coupling · 40 kg
F-TM-60A · magnetic coupling · 60 kg
F-TM-150 · magnetic coupling · 150 kg

05 / 4 MODELS

Release hooks

Release devices for deploying or recovering loads.

F-DT100 · release hook · 100 kg capacity
F-DT500 · release hook · 500 kg capacity
F-FDT100 · buoyancy release · 100 kg capacity
F-EDT100 · electric release · 100 kg capacity

COMPATIBILITY

Match the tool to the vehicle.

The brochure does not publish a tool-to-vehicle matrix. Compatibility is confirmed for each enquiry against the supplied vehicle version.

Tool compatibility checks
Group	What to confirm	Compatible vehicles
Manipulator arms	Mounting point, payload and trim, electrical interface and control	Confirmed on enquiry
Intervention tools	Hydraulic or water supply, pressure, reaction forces and vehicle stability	Confirmed on enquiry
Measurement & sampling	Mounting, power, data link and recording software	Confirmed on enquiry
Thrusters	Vehicle model, connector, control electronics and thrust allocation	Confirmed on enquiry
Release hooks	Load, release method, trigger signal and recovery plan	Confirmed on enquiry

Figures from the manufacturer’s 2026 product introduction.

QUESTIONS

Ordering tools and accessories.

Can tools be ordered separately?

Tools and accessories can be quoted with a vehicle or on their own. Availability, lead time and export conditions are confirmed per enquiry.

Will they fit another manufacturer’s ROV?

Mechanical, electrical, hydraulic and communication interfaces differ between vehicles. Fitting to another brand needs interface drawings and is assessed case by case.

Which vehicles carry hydraulic tools?

Hydraulic tools need a suitable power unit and enough payload and stability to react the tool forces. Light work-class vehicles such as the R-150 are the starting point; confirm the specific tool and vehicle combination.

Ask about tools & accessories

FROM TASK TO CONFIGURATION

Bring your project into focus.

Share the task, site conditions and required results. Build a clear brief for system selection.

Plan your project